Cart 0
Agilent 8494A Manual Step Attenuator DC-4 GHz, 0-11 dB, 1 dB steps. Opt 001
Agilent 8494A Manual Step Attenuator DC-4 GHz, 0-11 dB, 1 dB steps. Opt 001
Agilent 8494A Manual Step Attenuator DC-4 GHz, 0-11 dB, 1 dB steps. Opt 001

Agilent 8494A Manual Step Attenuator DC-4 GHz, 0-11 dB, 1 dB steps. Opt 001

Shipping calculated at checkout.
Only 1 left!

Agilent 8494A Manual Step Attenuator DC-4 GHz, 0-11 dB, 1 dB steps. Opt 001

Product Overview

The Agilent 8494A is a 4 GHz step attenuator from Agilent. Attenuators are a type of radio frequency (RF) test equipment that’s useful during RF design. When an engineer needs to reduce (attenuate) the level of an electronic signal, he or she uses an attenuator. Attenuation can protect circuit stages from receiving signal levels that are too high. RF attenuators may be fixed, switched, or variable, depending on their capabilities and applications.

Frequency Range: DC to 4 GHz
Attenuation Range: 0 to 11 dB, 1 dB steps
Insertion Loss at 0 dB: 0.6 dB + 0.09 dB/GHz
Maximum SWR: 1.5
Repeatability Life: 0.03 dB maximum, 5 million cycles per section
Maximum RF Input Power: 1 W (average), 100 W (peak)
Connector Type: choice of Type-N female, SMA female, APC-7

We Also Recommend

Anritsu TOSLK50A-20 Coaxial Calibration Kit, K(m), DC to 20 GHz

Anritsu TOSLK50A-20 Coaxial Calibration Kit, K(m), DC to 20 GHz
Anritsu TOSLK50A-40 Coaxial Calibration Kit, K(m), DC to 40 GHz

Anritsu TOSLK50A-40 Coaxial Calibration Kit, K(m), DC to 40 GHz
TDI Dynaload RBL488 100-600-4000 DC Electronic Load

TDI Dynaload RBL488 100-600-4000 DC Electronic Load
Anritsu K241C RF Power Splitter DC to 40 GHz, K(m) to K(f), 50 Ω

Anritsu K241C RF Power Splitter DC to 40 GHz, K(m) to K(f), 50 Ω
Anritsu TOSLN50A-18 Coaxial Calibration Kit, DC to 18 GHz

Anritsu TOSLN50A-18 Coaxial Calibration Kit, DC to 18 GHz