Agilent 83752A Synthesized Sweeper, 10 MHz to 20 GHz

$3,495.00
Unit price per

Shipping calculated at checkout.

Agilent 83752A Synthesized Sweeper, 10 MHz to 20 GHz, no option

Product Overview

The 83752A is a 20 GHz RF Generator from Agilent. An RF generator is a tool engineers use to generate sinusoidal outputs while testing electronic equipment. The output will automatically have its frequency varied or swept between frequencies. A “sweep” is one complete cycle of a frequency variation. Engineers use RF signal generators as test equipment, mostly to measure responses of filters, amplifiers, and electrical components.

Additional Features:

Frequency Range: 10 MHz to 20 GHz
Fully phase locked analog sweep for accuracy and speed
Flat and accurate output power to characterize the linear response of the test device
Offset frequency sweep for mixer test
Agilent 8350 programming mode for backwards compatibility
Standard 10 MHz time base: ±10 ppm
High stability time base (Option IE5): accuracy = calibration ± aging rate ± temperature effects ± line voltage effects
Aging rate: 5 x 10-10/day, 1 x 10-7/year
With temperature: 1 x 10-10/°C
With line voltage: 5 x 10-10 for 10% change

CW mode

Resolution: 1 Hz
Accuracy: same as time base
Switching time: 70 ms max

Stepped sweep mode

Resolution: settable 1 Hz, display 1 kHz
Accuracy: same as timebase
Minimum step size: same as resolution
Number of points: 2 to 1601
Switching time/point: 7 ms + 8 ms/GHz step
Dwell time/point: 1 ms to 1 s

Ramp (analog, phase locked) sweep mode

Resolution: 1 kHz
Accuracy (25 ±5 °C):
For 100 ms sweeps the greater of: ±.01% of span ±time
base or ±75 kHz ±time base
At other sweep speeds: [±.001% of span]/[sweep time (s)] ±time base

Markers

10 independent continuously variable markers
Display modes: z-axis intensity or RF amplitude pulse

Sweep functions

Start/stop, center frequency/span, marker, ramp,
stepped, manual, alternate and power sweep
Marker sweep: sweeps between markers one and two
Alternate sweep: alternates successive sweeps between current front panel setting and stored setup

RF output

Maximum leveled power (25 ±5 °C): +10 dBm
With option 1E1 (step attenuator): reduce by 1 dB
Minimum settable power: -15 dBm
With option 1E1: -85 dBm

Resolution

Settable: 0.01 dB
Display: 0.1 dB