Rohde & Schwarz NRP-Z11 Three-Path Diode Power Sensor 10Mhz - 8Ghz

$295.00
Unit price per

Shipping calculated at checkout.

Unit Includes
-Rohde & Schwarz NRP-Z11 Three-Path Diode Power Sensor 10Mhz - 8Ghz

Product Overview
The Rohde & Schwarz NRP-Z11 is a used 8 GHz 0.2 Watts RF Sensor from Rohde & Schwarz. Electronic test equipment sensors measure the power of waveforms, such as multi-tone and modulated radiofrequency (RF) waveforms. Sensors gather highly accurate modulation measurements using diode detectors.

10 MHz - 8 GHz
200 pW - 200 mW (P/N 1138.3004.02)
The multipath architecture, for which Rohde & Schwarz has a patent pending, has the following features:3 signal paths, each fitted with triple diodes
6 dB wide overlap ranges, smooth transitions
Simultaneous scanning and analysis
Chopper stabilization of the signal paths for repetitive signals
The advantages over conventional technology are obvious: high signal/noise ratio throughout, low modulation effect, negligible delays and discontinuities when switching signal paths, and the ability to perform a time-domain analysis of the test signal within the available video bandwidth.Thus these sensors not only compete with peak power meters, they are even superior in two respects:No restrictions on the RF bandwidth of the test signal
Larger dynamic range

We Also Recommend

Sencore PR570 model Powerite II Variable Isolation Transformer

Yokogawa WT210 Wattmeter, 0.5 Hz to 100 kHz

Agilent 902D (00902-60004), 3.5 mm(f) fixed broadband load, DC to 26.5GHz

Agilent 5061-5311 Adapter, 3.5mm(f) to 3.5mm(f)

Agilent 1250-1745 Adapter, N(f) to 3.5mm(f)